FAQ and knowledge base

Industries and scenarios

Practices by industry and plant type

All questions 20 questions

01 What does a phone and consumer electronics contract manufacturer focus on in MES?

Three things: changeover error-proofing (feeder placement table plus the three-way check), full-chain traceability (records from every stage joined into an SN history), and packing error-proofing (accessory binding plus weight verification).

Changeover error-proofing
Placement table plus the loading three-way check plus full-slot verification at changeover. Lines with frequent model changes fear wrong material most, so error-proofing is not optional.
Full-chain traceability
Material, test parameters and quality data from SMT, DIP, assembly and packing join into an SN history, so brand-owner spot checks export on the spot.
Packing error-proofing
Inner-carton accessory binding and weight verification. Contract manufacturers ship large volumes and complaints about wrong or missing parts are expensive, which makes the shipping stage the best return on effort. Manufacturers serving phone brands and ODMs generally take the full-chain route.

Baichuan delivers three things for contract manufacturing: changeover error-proofing, full-chain traceability and packing error-proofing.

02 What special requirements does automotive electronics place on MES?

Deep traceability: material lot, supplier, date code and process parameters all archived, with retention set by the customer and commonly five years or more. Engineering change and alternate-part control must also be strict.

Traceability depth
Material lot, supplier, date code and process parameters are all archived, with retention to the customer's requirement, commonly five years and up.
Change control
Engineering changes, material substitution and SN freezing need strict process control; SN freeze and material blocking are basic requirements.
Audits are routine
Process audits and system audits rotate continuously. With IPQC, first and last article checks and MSD control online, audits become far more manageable. Baichuan's automotive electronics customers typically combine multi-stage traceability with error-proofing.

03 What should an FPC manufacturer watch for in MES?

Incoming material usually carries the customer's own barcode format, so parsing and binding saves a labelling step. The key modules are material error-proofing, material traceability and quality traceability, supported by AOI/SPI data for improvement.

Barcode parsing
FPC incoming material usually carries customer-format barcodes; parsing and binding directly saves a labelling step and avoids mislabelling during re-taping.
Error-proofing and traceability
SMT material traceability, material loading error-proofing and SMT quality traceability are the combination FPC customers take most.
Quality focus
FPC placement tends to produce offset and tombstone defects, so automatic AOI/SPI capture plus top-N defect analysis is the most direct improvement. Delivered FPC projects generally follow this approach.

Baichuan's FPC customers take material error-proofing plus material traceability as their core module combination.

04 How does MES work for power banks and energy storage?

Cells, protection boards and other key parts are scanned and bound to the SN, burn-in time and temperature data are archived against the SN, and material and quality data connect from SMT through packing.

Key part binding
Cells, protection boards and other key materials are scanned and bound to the SN, making lots traceable.
Burn-in data
Burn-in duration, temperature and exception records bind to the SN. Burn-in before shipment is a mandatory check for storage products, and the data must be retained.
Full-stage traceability
Material and quality traceability connect across SMT, DIP, assembly and packing. The standard package for power bank and energy storage customers is full-stage material traceability plus test parameter traceability.

Baichuan delivers key-part binding and burn-in data retention for energy storage and power bank scenarios.

05 How is high-mix low-volume wearables production managed?

Maintain feeder placement tables and SOPs by model and issue them in one click at changeover. On mixed lines, loading is verified per work order, so material for model A cannot be loaded into a slot for model B.

Fast changeover
Placement tables and SOPs are maintained by model and issued in one click at changeover, cutting engineering preparation time.
Mixed-line error-proofing
On multi-model lines, loading is verified per work order, so model A material cannot reach a model B slot.
Flexible investment
Modules combine as needed: error-proofing and traceability first, scheduling and equipment connectivity once stable. High-mix low-volume needs a flexible investment rhythm.

Baichuan maintains placement tables and SOPs by model and switches them in one click at changeover.

06 What compliance requirements apply to medical electronics MES?

Records are generated in real time with timestamps and operator identity, which meets data reliability expectations. Key material binding, process parameter retention and batch recall capability are the baseline.

Data integrity
Records generated in real time with timestamps and operator identity satisfy data reliability audit expectations by construction.
Full traceability
Key material binding, process parameter retention and batch recall capability. Medical recalls are rare but extremely costly; traceability is insurance.
Strict controls
Material blocking, SN freezing and first and last article control are used most by medical customers. Medical, automotive and defence projects generally follow this pattern.

Baichuan makes material blocking, SN freezing and first and last article checks standard process for medical customers.

07 How is defence electronics different?

On-premise deployment, data that never leaves the plant, and delivery that includes the database schema documentation. Every stage is scanned and recorded, accounts are authorised by level, and operation logs are complete.

On-premise deployment
Data stays on the customer's own server and delivery includes the schema documentation, with no dependency on an external cloud.
Process records
From board feeding to shipment, every stage is scanned, so responsibility is assigned and traceable.
Granular permissions
Accounts are authorised by level and operation logs are complete, meeting confidentiality and audit requirements.

Baichuan supports on-premise deployment and level-based account authorisation for confidentiality and audit requirements.

08 How does a single-line plant choose MES differently from a group with several plants?

A small plant starts with one stage (4–8 weeks, from around CNY 100k); a group needs modelling for one company with multiple sites and unified coding. Both run on the same modular architecture and scale without a rebuild.

Small plant start
One stage live in 4–8 weeks from around CNY 100k, solving the two sharpest pains: wrong material and traceability.
Group architecture
Plant modelling supports one company with multiple sites, with process stages, operations and defect codes defined centrally so plant data is comparable.
Smooth expansion
The modular design lets a plant that runs well add stages and modules within the same coding scheme, without replacing the system and rebuilding.

Baichuan's plant modelling supports one company with multiple sites sharing one coding scheme.

09 How should MES be planned for a new plant?

Fix master data first (process stages, operations, defect code library, barcode rules), plan scan points, dashboard positions and network drops during line layout, then bring stages live in sequence.

Plan first
Stage breakdown (SMT, DIP, test, assembly, packing), operation definitions, defect code library and barcode rules: these master data are settled first.
Build in parallel
Scan points, dashboard positions and network drops are planned during line layout; retrofitting cabling later is both expensive and ugly.
Stage-by-stage go-live
Bring stages live in sequence on a 4–8 week rhythm, so production is digital from the first run. Safer than building everything and installing the system afterwards.

Baichuan gets involved at the planning stage on scan points, dashboard positions and network drops.

10 How does an existing plant implement MES without disrupting production?

Go stage by stage, schedule work in low-demand windows, and run manual and system in parallel for a few days at first. With on-premise deployment, standalone equipment keeps running even if the network or system fails.

Stage strategy
One process stage at a time, stable before the next, so risks do not stack up.
Off-peak implementation
Data initialisation and training are scheduled in line-stop windows, and manual records run alongside the system for a few days before the cutover.
No production stoppage
On-premise deployment keeps the database on the plant's server, and network or system failures do not stop standalone equipment. The line can still run if the system is down, which is the baseline for retrofit projects.

Most of Baichuan's retrofit projects switch line by line with production running.

11 Can MES solve only the wrong-material problem?

Yes. Material barcodes, feeder placement tables, PDA scan comparison and loading records are enough to stop wrong material, and the loading records themselves become the data source for later traceability.

Minimum combination
Material barcode, placement table, PDA scan comparison and loading record: these four contain wrong material.
Natural extension
Loading records from error-proofing are inherently a traceability data source, so adding traceability, reports and warehousing later follows naturally.
Friendly pricing
Priced by module and accepted by stage, with nothing charged for what is not deployed, so the budget pressure of small steps is low. Many Baichuan customers started with the single error-proofing module.

12 How are multiple plants or workshops managed under one system?

Company, site, stage, operation and defect code are defined in layers under one coding scheme, so plants compare on the same basis. A model plant runs first, then configuration and process are replicated rather than re-implemented.

Unified modelling
Company, site, process stage, operation and defect code are defined in layers, with all plants sharing one coding scheme.
Comparable data
Output, first-pass yield and efficiency compare on the same basis, and the management dashboard shows differences between plants.
Progressive rollout
A model plant runs first, then configuration and process are copied to other plants rather than implemented again.

Baichuan gets a model plant running first, then copies the configuration to other plants.

13 What can electronic dashboards actually show?

A station dashboard covers one line (work order progress, lost hours, inspection and maintenance, alarms); a consolidated dashboard covers the plant (total output, machine efficiency, attainment, SMT yield, open work orders, exception counts).

Station dashboard
Work order progress, lost hours, responsible person, equipment inspection and maintenance status, and alarms, managing one line on one screen.
Consolidated dashboard
Total line output, machine efficiency, plan attainment, line running rate, SMT yield, open work orders, and total and unhandled exceptions.
Exception monitoring
Coloured indicators per department (red for alarm, green for normal), with exception levels and escalation from team leader to supervisor, engineer, manager and general manager. Faster exception response means shorter line stops.

Baichuan provides station dashboards and a consolidated dashboard as two separate views, each with its own purpose.

14 What is smart data push and how is it used?

Shortages push automatically to purchasing or the customer contact, exceptions escalate by level to the responsible person, and daily and weekly reports go to management on schedule. The value is in shortening the time from detection to handling.

Shortage push
When kitting checks find a shortage, an email goes automatically to purchasing or the customer contact.
Exception push
Exceptions escalate by level to the responsible person, with handling progress trackable.
Report push
Daily and weekly reports reach management on schedule. Done well, push shortens response time, and the gap between detection and handling narrows noticeably.

Baichuan's smart data push covers shortages, exceptions and scheduled reports.

15 How is supplier barcode collaboration done?

Printing software is released to suppliers so material arrives coded, customer-format codes with fixed rules are parsed directly, and X-ray counting machines write counted quantities back and print new codes.

Supplier printing
Barcode printing software is released to suppliers, so incoming material carries an MES barcode and is scanned straight into the system on receipt.
Parse and reuse
Customer-format barcodes with fixed rules are parsed and bound directly, including ID, part number, quantity, DC and supplier.
Counting integration
X-ray counting machines provide counted quantities, and scanning the MES barcode prints a post-count barcode. Incoming material is the first kilometre of traceability; get it right and the rest follows.

Baichuan releases printing software to suppliers so incoming material arrives already coded.

16 How does smart warehousing differ from ordinary inventory software?

The difference is in constraints and policies: nothing enters stock before IQC, over-issue is warned, simulated locks prevent kitted material being diverted, FIFO and residual-first execute through lights, and it connects both ways with ERP and MES.

Process constraints
Material that has not passed IQC cannot be stocked, over-issue raises a warning, shortage lists are generated, and simulated locks prevent kitted material from being diverted.
Policy execution
FIFO and residual-first execute through rack lights, so lot control does not depend on the storekeeper's memory.
Two-way integration
Receipts, issues and actual quantities connect with ERP, and line-side consumption connects with MES, so warehousing is no longer an information island.

Baichuan's warehousing module shares one inventory account with MES.

17 Can a small plant without dedicated IT still implement MES?

Yes. PDA scanning dominates, screens are trimmed per role, and SOPs display electronically at the station, so new staff are productive after half a day of training. Service points and ticket response back it up.

Simplified operation
Mostly PDA scanning, role-trimmed screens and electronic SOP delivery mean a new operator is productive after half a day of training.
Service backing
18 service points respond locally, with a handling plan within 48 working hours for standard tickets. What small plants fear most is nobody to call when something goes wrong.
Stage-by-stage start
One stage live from around CNY 100k does not strain cash flow. Among the 300-plus customers already live, small and mid-sized plants are the majority.

Baichuan's 18 service points respond locally, with a handling plan within 48 hours for standard tickets.

18 Can MES help us pass customer audits?

Yes. Traceability reports, inspection records, loading records and test data are retrieved on the spot, with timestamps and operator identity. Running the audit checklist as a self-check in advance works better still.

Documents on demand
Traceability reports, inspection records, loading records and test data are retrieved during the audit, with no last-minute fabrication.
Credible process
System records carry timestamps and operator identity, which auditors accept more readily.
Pre-audit
After go-live, run the audit checklist against the system: traceability completeness, error-proofing effectiveness, record discipline. Many Baichuan customers were pushed into MES by brand-owner audits, and a good pass rate is a real source of reputation.

19 How are lines with frequent changeovers managed?

Full-slot verification at changeover, SOP issued by model in one click with the old revision recalled, changeover and verification records archived, and first-article inspection as the final gate.

Changeover verification
Every slot is verified at changeover, cross-checking slot number, material barcode and feeder number; a mismatch stops the line.
Document synchronisation
SOP is issued by model in one click and the old revision recalled, so outdated documents do not circulate on the floor.
Records
Changeover time, verification records and loading records are archived, with first-article inspection after the changeover as one more gate. Lines that do this consistently push wrong-material exceptions down very low.

Baichuan chains changeover verification, SOP issue and first-article inspection into one changeover flow.

20 How does MES handle engineering changes (ECN)?

After the BOM changes it is updated centrally and synchronised with ERP, with the old revision archived. Affected SNs are frozen and related material blocked, then released once handled.

BOM synchronisation
The BOM is updated centrally after a change (synchronised with ERP), with the old revision archived and queryable.
Alternate-part rules
Issuing can specify main or alternate parts, loading verifies against the rules, and the substitution is recorded.
Work-in-progress control
Affected SNs are frozen and related material blocked, then released after handling. Uncontrolled changes are a common source of batch incidents, and the system blocking is more reliable than a notice.

Baichuan synchronises the BOM and freezes affected SNs after an ECN.

Next

Send us your line's problems

Describe your line's current state and the step that most needs fixing; we'll send a solution outline per process stage within 2 business days.

Address
Building 8, Room 303, Yilisheng Industrial Park, 602 Fengtang Avenue, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen

Shenzhen Baichuan Zhike Technology Co., Ltd. · Since 2015 , serving electronics manufacturers across handsets, tablets, automotive electronics, FPC, WiFi modules, energy storage and more.

Used for this conversation only; never shared externally. By submitting you agree to be contacted about this request.

Questions?