FAQ and knowledge base

Quality and traceability

Two-way traceability, inspection, defect analysis

All questions 20 questions

01 How far back can MES traceability actually go?

Forward from a reel to everywhere it went, and backward from an SN to every material and station record. Date, barcode, lot, serial number, work order and material are all queryable without opening a ledger.

Forward: material to product
Scan one material barcode and the system lists which slots it was loaded into, which work orders it served and which SNs it flowed to. A lot recall defines its scope in minutes.
Backward: product to material
Scan an SN or PCB barcode and every material lot, supplier, date code, loading record, AOI/SPI result, test record and packing detail appears.
All dimensions
Date, barcode, lot, serial number, work order and material are all queryable electronically. Baichuan implements queries across these six dimensions, and customer audit requests are exported directly.

02 What is two-way traceability?

Forward from material to product (which SNs a lot went into) and backward from product to material (which reel this SN used, which stations it passed, what parameters). Only when both directions work is it two-way.

Backward traceability
From a complained-about SN back through the whole record: who placed the part, which reel was used, what the reflow profile was, whether test parameters passed. Responsibility and cause can both be located.
Forward traceability
When a supplier reports a suspect capacitor lot, the system lists every SN, work order and shipment that used it, so holds and recalls can be scoped immediately.
Checking for breaks
Genuine two-way traceability requires a scan record at every station. One missing link is a break, so map the station flow and fix the mandatory scan points before go-live.

Baichuan writes mandatory scan points into the process configuration, and the system locks the station when a scan is missed.

03 A customer audit needs traceability records. How fast can MES export them?

A randomly selected SN produces its full chain on the spot; bulk exports by work order or date range are typically ready in seconds to minutes.

On-the-spot queries
A customer representative picks an SN at random and the system pulls the material, production, test and packing record immediately. That is far more convincing than a report assembled afterwards.
Bulk export
Export a traceability package by work order or date range (material list, station records, test data) in seconds to minutes.
Why auditors value it
Records are generated in real time with timestamps and operator identity, which makes fabrication expensive. Many Baichuan customers were pushed into MES by brand-owner audits, and the traceability module is usually the first one they take.

04 How do traceability breaks happen, and how are they avoided?

Common causes: manual insertion without scanning, test stations recording results without binding to SN, packing accessories not bound, and barcode relationships not rebuilt after rework. Mandatory scans plus station locking on a missed scan solve it.

Common breaks
Manual insertion without a scan, test stations recording results without an SN, packing accessories not bound, and barcode relationships not rebuilt after rework.
Hard constraints
Scan before a unit moves on, bind key materials, and raise an alarm that locks the station when a scan is missed. Traceability belongs in the process, not in a procedure document.
Daily self-check
MES can run a chain-integrity check that shows how many SNs are missing a link each day. Baichuan's approach of mandatory scans plus exception alarms surfaces a break the same day, not at the audit.

05 How does incoming inspection (IQC) work in MES?

Scan to submit for inspection with automatic quantity checks, sample by AQL, and record every inspection item and judgement. Only accepted material can be stocked; untested material cannot enter inventory.

Submission and sampling
Scanning to submit verifies quantity automatically, and sampling follows AQL rather than an inspector's judgement.
Recording judgements
Inspection items, measured values, judgement, inspector and time are all recorded, with datasheets and approval documents attached to the part number for retrieval.
Linked to warehousing
Only accepted material can be stocked; untested material is refused. That link is what prevents use before inspection. Baichuan's IQC module also compares the MES barcode with the manufacturer barcode to catch mislabelled incoming material.

06 How is first-article inspection done, and does it prevent batch wrong-material incidents?

First-article and last-article inspection items are kept as templates, and results bind to the work order. First-article verification confirms slot material matches the BOM, which combined with loading scans gives double cover.

Recording first and last articles
Inspection items are maintained as templates, results bind to the work order, and who inspected and when is traceable.
Working with error-proofing
First-article verification checks that slot material matches the BOM; together with loading scans it stops batch wrong-material incidents before they start.
Why the last article matters
A last-article check at work-order close confirms the final batch has not drifted, which is particularly worthwhile on lines with frequent changeovers. Baichuan keeps first and last article management in the SMT quality module, chained with IPQC and FQA.

07 How is IPQC patrol data managed online?

Results bind to work order, time window and station, with defect rates visible online. Exceptions escalate by level from team leader to general manager, and records archive automatically.

Real-time view
Defect rates and defect data across all operations are queryable online, with patrol results bound to work order, time window and station.
Exception reporting
Exceptions that cannot be captured automatically are reported by hand, and the system escalates by level: team leader, supervisor, engineer, manager, general manager.
Data accumulation
Patrol records archive automatically, so weekly and monthly reports no longer need retyping. The saving is real: projects already live consistently report a large drop in record-keeping workload.

Baichuan escalates patrol exceptions from team leader to general manager, with handling recorded.

08 How are process defects entered and analysed?

Defect codes and symptoms are predefined by operation, so operators select a code instead of writing a description. Analysis then pivots by work order, model, station, time window and designator.

Standardised entry
Defect codes and symptoms are predefined by operation. Operators select a code rather than writing free text, which is what makes the data aggregatable.
Multi-dimensional analysis
Pivot by work order, model, station, time window, designator and symptom, with a top-5 defect dashboard showing the ranking directly.
Attribution
Defect records carry station, operator and equipment, so improvement actions have a target. Reducing quality errors depends on this loop, not on reminding people in meetings.

Baichuan predefines defect codes by operation so operators select instead of typing.

09 What is top-5 defect analysis good for?

The dashboard shows the top five defect locations and symptoms in real time, with before-and-after comparison. The designator dimension separates design and process issues from manufacturing issues.

Dashboard
Top five defect locations and top five symptoms refresh in real time per work order. The SMT station dashboard also shows the top five AOI and SPI defects with locations.
Improvement loop
Top items become improvement projects, and the before-and-after numbers settle the argument: this week against last week, visible on one screen.
Designator dimension
Defect counts summarised and detailed by designator (line, station, model, work order, defective barcode, defect information), so design, process and manufacturing issues can be separated.

Baichuan's station dashboard shows the top five AOI/SPI defects and their locations in real time.

10 How does FQA/OQC outgoing inspection connect to MES?

Scan to submit, verify quantity against the batch, and bind results to the product barcode, so an uninspected SN cannot ship. At packing, colour-box code, carton code and weight checks add another layer.

Inspection flow
Scan to submit, verify quantity per batch, and bind inspection records to the product barcode; an uninspected SN cannot be shipped.
Linked to traceability
Outgoing inspection results join the SN's full record, so a complaint can show the state at shipment.
Packing error-proofing
At packing, scan the colour-box and carton codes, set the pack quantity, and verify weight on a scale to catch missing units. Scanning plus weighing stops most of the low-level shipping errors.

Baichuan folds outgoing inspection results into the SN's full record.

11 How does repair management close the loop?

Defective units are scanned in on receipt, status is visible online, and a replacement part's barcode is scanned and rebound to the SN. Repair reason codes flow back into defect analysis.

Receipt and status
Defective units are scanned in and status is queryable online, which ends arguments about who holds a unit.
Replacement traceability
Replacement parts are scanned and rebound to the SN, so which lot was fitted and by whom can be traced.
Data feedback
Repair reason codes flow back into defect analysis, so a recurring failure mode shows up in top-N analysis. Repair is not the end point; it is a data source.

Baichuan routes repair reason codes straight back into defect analysis.

12 How is material blocking managed?

Blocking can combine part number, supplier, date-code lot and work order, with interception at both loading and issuing. Releasing a block records time and operator.

Dimensions
Part number, supplier, date-code lot and work order, combined, which handles targeted cases such as one supplier's one lot.
Interception points
A blocked material raises an error during loading comparison and can also be blocked at issuing: two checkpoints.
Release trail
Both blocking and releasing record time and operator, so a release after a supplier re-inspection is documented.

Baichuan intercepts blocked material at both loading and issuing.

13 What is SN range freezing for?

When a customer complaint is under investigation, an engineering change is pending or a shipment needs re-inspection, freeze first and handle afterwards. A frozen SN alarms at the next station, for single units or batches.

Scope
Single units and batches can both be frozen, and a frozen unit alarms at the next station, so nobody routes around it.
Typical scenarios
Customer complaints under investigation, engineering changes pending confirmation, shipment re-inspection. In these cases freezing first is more reliable than sending a notice.
Releasing
Releasing also records reason and operator, so the handling process is fully documented.

Baichuan records reason and operator for both freezing and releasing.

14 How is MSD control implemented in MES?

Scan the label to record opening time, warn automatically on expiry, and scan as resealed if unused. Baking, resealing and relabelling close the loop, and the expiry list can be pulled in advance.

Opening control
Scanning the MSD label records the opening time, expiry is warned automatically in use, and unused material is scanned as resealed with the reseal time.
Baking loop
Expired material is baked, baking time is controlled, and the package is resealed and relabelled, completing the cycle.
Queries and warnings
Opening, completion and reseal times plus expiry dates are queryable, and the expiry list can be pulled in advance. Batch cold joints caused by moisture absorption are what this prevents.

Baichuan's MSD expiry list can be pulled in advance instead of waiting for an alarm.

15 How does AOI/SPI data reach MES automatically?

Through an API or LOG files depending on equipment brand, covering SPI and pre- and post-reflow AOI. Reflow profiles bind to work orders and can be correlated with quality analysis.

Capture scope
SPI, pre-reflow AOI and post-reflow AOI are all covered, and DIP pre- and post-wave AOI can be integrated as well.
Profile correlation
Reflow profiles uploaded from the oven bind to work orders, so profile deviations and quality issues can be analysed together.
Dashboard
AOI and SPI yield, defect counts and top five defects with locations appear on the SMT station dashboard in real time, giving process adjustments data to work from. Baichuan integrates equipment through APIs or LOG files, chosen by brand.

16 How is test parameter traceability done?

Test platform data enters the system automatically and binds to SN, work order, fixture, station and time. Parameter distributions for passing units are part of the quality record, which supports the claim that shipped units met specification.

Automatic capture
Test platform data enters MES automatically, avoiding missed or altered manual records.
Bindings
Test data binds to SN, work order, fixture and test time, so results can be compared across fixtures and stations.
Analytical value
Parameter distributions of passing units are part of the quality record and can demonstrate that shipped parameters were within specification.

Baichuan binds test data to fixture numbers so results can be compared across fixtures.

17 How is burn-in data recorded and traced?

Start and end times, temperature profile and exceptions are recorded against the SN. Burn-in equipment can be integrated to cut manual transcription, and exceptions go straight into repair flow.

Data items
Burn-in start and end time, temperature profile or setpoint, and exception records, all bound to the SN.
Equipment integration
Burn-in equipment can be integrated to reduce manual transcription.
Linked to repair
Burn-in exceptions enter repair flow directly, and reason codes accumulated over time show whether a problem is batch-wide or unit-specific.

Baichuan integrates burn-in equipment to reduce manual transcription.

18 How are quality reports (first-pass yield, defect rate) generated automatically?

Input, output, defects, efficiency and defect rate are summarised per operation and output by work order, model, line, time window and customer, with daily and weekly reports exported in one click.

Automatic statistics
Cumulative input, output, defects, efficiency and defect rate per operation are summarised automatically, without a clerk building the table.
Timeliness
Online quality reports refresh in real time. Projects already live consistently report a clear step up in report timeliness and data completeness.
Multi-dimensional output
Filter by work order, model, line, time window and customer, and export daily or weekly in one click. The reduction in statistical workload is the most consistently reported benefit among live projects.

Baichuan outputs quality reports by work order, model, line, time window and customer.

19 How long is traceability data retained?

With on-premise deployment the data sits in your own database: hot data is queried online, and archived history remains retrievable by lot or SN. Automotive and medical customers often write retention periods into the contract.

Where data lives
On-premise deployment keeps data in the customer's database, and delivery includes the schema documentation, so nobody else controls access.
Archiving
Hot data is queried online; archived history is still retrievable by lot or SN, so audits are unaffected.
Compliance note
Automotive electronics and medical customers often fix retention periods in the contract. Read that clause before signing and set retention deliberately rather than accepting the default.

Baichuan's on-premise data stays in the customer's database and remains retrievable by SN after archiving.

20 How is cost of quality (rework and scrap) calculated in MES?

Scrapped material is valued at BOM cost, and rework at recorded headcount and hours, giving direct cost of quality that can be compared across models and lines.

Cost basis
Scrapped material is valued at BOM cost; rework hours come from the labour tracking module; the two together give direct cost of quality.
Baseline for comparison
Compare on the same basis before and after improvement, and the saving from fewer quality errors becomes an actual number.
Decision support
Which model carries the highest cost of quality, which line concentrates scrap: with the data visible, improvement resources know where to go.

Baichuan values rework and scrap from BOM cost and the labour tracking module.

Next

Send us your line's problems

Describe your line's current state and the step that most needs fixing; we'll send a solution outline per process stage within 2 business days.

Address
Building 8, Room 303, Yilisheng Industrial Park, 602 Fengtang Avenue, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen

Shenzhen Baichuan Zhike Technology Co., Ltd. · Since 2015 , serving electronics manufacturers across handsets, tablets, automotive electronics, FPC, WiFi modules, energy storage and more.

Used for this conversation only; never shared externally. By submitting you agree to be contacted about this request.

Questions?