01
How many people can MES save?
What it saves is clerical and traceability hours, not headcount. The point of MES is letting the same people run more lines, more accurately.
- What the hours are
- Reports generated automatically, traceability queried from the system, exceptions pushed to the right person: statistical work that used to take three people now comes out of the system.
- Performance gains
- Responsibility is attributable and output is visible, so worker performance rests on data and management actions take effect faster.
- The right framing
- MES lets the same people run more lines more accurately; it is not a redundancy tool. Projects launched with a headcount-reduction expectation end up disappointed.
Baichuan positions MES as letting the same people run more lines.
02
MES or WMS first?
Frequent SMT wrong material and customer traceability demands point to MES first; book-versus-physical warehouse discrepancies and issuing errors point to WMS. A small plant can cover both with the WMS module built into MES.
- When MES comes first
- Frequent SMT wrong material and customer audits demanding traceability: WMS cannot solve either.
- When WMS comes first
- Serious warehouse book-versus-physical gaps and frequent issuing errors: clean up the warehouse first.
- One-system option
- The WMS module inside MES (receipt, issue, return, stocktake) covers both at once, which is better value for a small plant. Baichuan's WMS shares its codebase with MES, so the data matches by construction.
03
Could process parameters leak through MES?
No. Roles are authorised by position, visibility of parameters and BOMs is minimised, viewing, exporting and changing are all logged, and deployment is on-premise.
- Permission control
- Role authorisation is trimmed by position, visibility of process parameters and BOM data is minimised, and accounts are managed by level.
- Audit trail
- Who viewed, who exported and who changed are all logged, so a leak is traceable.
- Deployment protection
- On-premise deployment puts data on the customer's own server with the schema under their control. Protecting sensitive processes takes both policy and system.
Baichuan supports on-premise deployment and limits process parameter visibility by role.
04
How is employee resistance overcome?
Let people see the system doing their work: minimum steps, alarms watching for exceptions on their behalf, and transparent output and performance data. What employees support is not the system; it is fairness.
- Less effort
- Minimum steps, fast response and alarms that watch for exceptions. Once the system does work for them, resistance becomes reliance.
- Start with hard constraints
- Key actions are locked by the system so there is no way around them, with on-site support during the adjustment period.
- Tie to interest
- Output and performance data become transparent, so doing more is visible. What employees support is not the system; it is fairness.
Baichuan uses alarms to watch exceptions, so staff feel the relief first.
05
How do you tell an MES project is failing?
Two warning signs: the shop floor still runs outside the system with paper forms, and book-versus-physical gaps plus traceability breaks are frequent. The remedy is to return to the smallest closed loop on one stage.
- Adoption warning
- When paper forms still run alongside, the system has become a second set of books, which is the precursor of failure.
- Data quality warning
- Frequent book-versus-physical gaps and many traceability breaks mean capture discipline has collapsed, and everything built on top is illusory.
- Stopping the slide
- Return to the minimum loop (one stage, core functions), cut inflated requirements and get the plant manager to champion it again. Small repairs cost less than pushing through.
When a project stalls, Baichuan returns to the minimum closed loop on one stage.
06
How does a plant with no barcode experience start?
Code the material first (print in-house or parse incoming codes), then generate SNs by work order rules. Add printers, PDAs, scanners and labels, and run labelling for a week before turning on error-proofing.
- Coding order
- Material barcodes come first, through supplier collaboration or parsing incoming codes; SN barcodes follow the work order rules.
- Hardware list
- Barcode printers, PDAs, scanners and label consumables, with models and quantities listed in the implementation plan.
- Pacing
- Label for a week in trial before turning on error-proofing. Once the barcode habit forms, the resistance to go-live halves.
Baichuan can release printing software to suppliers, reducing in-house labelling.
07
One code per unit or one code per lot?
Grade by material risk: key parts get SN-level binding, ordinary parts are managed at lot level, and most projects end up with a hybrid.
- SN level
- Per-unit binding with a full chain history, strongest for audits and complaints, at a higher labelling and scanning cost.
- Lot level
- Reel or carton code management, tracing back to the supplier lot, at lower cost and higher throughput.
- Hybrid
- SN binding for key parts plus lot management for ordinary parts. Real projects are mostly hybrid, graded by material risk.
Baichuan grades coding by material risk into a hybrid model.
08
Can customers be given access to MES traceability data?
Yes. A customer account sees only the traceability data for its own products, exportable by date, barcode, lot, serial number, work order and material.
- Permission isolation
- A customer account sees only its own products' traceability data (material lots, station records, test results), not other orders or internal costs.
- Report export
- Traceability packages and shipment reports export to the customer's template on request.
- Value
- Opening traceability to a brand owner is a differentiator: transparency is trust. Baichuan's queries export by date, barcode, lot, serial number, work order and material, which suits customer collaboration.
09
How are day and night shifts managed in MES?
Shifts are defined on the dashboard and switch automatically, output and defects are compared by shift, and operation records carry person and timestamp.
- Shift definition
- The station dashboard supports operator photos and automatic day-night switching, making handover clear.
- Data collection
- Output, defects and lost hours are counted by shift, and shift comparison exposes management differences.
- Person dimension
- Operation records carry person and timestamp, so a night-shift problem is attributable. For multi-shift plants, shift comparison is the main management lever.
Baichuan's station dashboard supports operator photos and automatic day-night shift switching.
10
How are outsourced processes brought into MES?
Outbound material binds to SN or lot, returning goods are inspected on receipt, and status is visible online. Large subcontractors can be given restricted accounts for remote entry.
- Movement records
- Outbound material binds to SN or lot, subcontractor and operation; returning goods are inspected and received, and status is queryable online.
- Result backfill
- Subcontract process data, such as surface treatment or adhesive cure parameters, is backfilled into the SN history as needed.
- Deeper collaboration
- Large subcontractors can be given restricted accounts for remote entry. Control the movement first, then discuss depth of collaboration.
Baichuan can issue restricted accounts to subcontractors for remote entry.
11
How is trial production or small-batch sampling handled?
The work order flow can be simplified, but material use and key parameters are still recorded. Trial defects become inspection items and error-proofing rules at mass production, and trial SN blocks stay separate from production.
- Light execution
- Sampling runs are small with many skipped steps, so the work order flow can be simplified. Material use and key parameters are still recorded.
- Capturing problems
- Trial defects and engineering issues enter the system and convert automatically into inspection items and error-proofing rules at mass production.
- SN blocks
- Trial SNs are generated to the rules but kept separate from production numbering. Trial data is the rehearsal for mass production; record it fully and production makes fewer mistakes.
Baichuan manages trial SN blocks separately from production blocks.
12
How does MES handle rework and repair?
Repair stations receive the unit, actions are recorded, replacement parts are bound, and the unit passes re-inspection, all flowing through the system. Rework rates and top causes are summarised, and batch problems trigger an SN freeze first.
- Rework flow
- Defective units are received at the repair station, actions recorded, replacements bound, and re-inspection passed, all flowing through the system.
- Statistics
- Rework rate, top rework causes and rework cost are summarised automatically, giving improvement projects a data basis.
- Linked to freezing
- Batch problems are frozen first, then released once the rework plan is settled. Rework management maturity shows in whether it is measurable, traceable and improvable.
Baichuan links rework flow with SN freezing.
13
How is semi-finished inventory managed in MES?
Semi-finished goods get barcodes and are recorded on receipt, issue and return by scanning. Assembly checks kitting against the BOM before starting, and receipt documents connect to ERP so the books match.
- Barcode movement
- Semi-finished goods get a barcode (SN or lot), with receipt, issue and return recorded by scanning.
- Kitting support
- Assembly checks semi-finished kitting against the BOM before starting and warns about shortages early. Inaccurate semi-finished stock turns assembly scheduling into guesswork.
- ERP connection
- Finished and semi-finished receipt documents connect to ERP so books and physical stock agree. Baichuan's finished-goods module covers semi-finished and finished receipts and issues, with statements generated automatically.
14
Can MES support UPH and capacity targets?
Set standard output by model and line and show it on the dashboard, with hourly output trend and attainment in real time. Lost hours and downtime causes can be split by equipment, material and people.
- Target setting
- Standard output is set by model and line, and the dashboard shows customer, work order, model and standard.
- Real-time tracking
- Hourly output trend, plan attainment and line running rate appear on the consolidated dashboard.
- Loss analysis
- Lost hours, downtime causes and changeover time are counted, so whether UPH is held back by equipment, material or people can be separated in the data.
Baichuan sets standard output by model and line, with lost hours and downtime causes on the consolidated dashboard.
15
How does MES support piece-rate payroll?
Output and quality for key positions are recorded per person, hours are recorded as headcount and duration, and data is exported or connected to the payroll system. MES keeps records; allocation logic stays in payroll.
- Output per person
- Output and quality data for key positions are recorded per person, and the labour module records headcount and duration.
- Credible data
- System records cannot be changed casually, so both sides accept them. Attributable responsibility and improved worker performance rest on data both sides consider fair.
- Interface for calculation
- Output data is exported or connected to the payroll system, where the calculation logic runs. MES keeps records; payroll handles allocation. The boundary is clear.
Baichuan records output and hours, leaving the calculation logic to the payroll system.
16
How are warehouse and line-side stores managed separately?
They are accounted separately, with kitting as the handover point. Issued material is restricted to its line, over-issue is warned, surplus is split and returned, and line-side residuals with elapsed time are on the dashboard.
- Separate accounts
- Warehouse stock and line-side work-in-progress material are accounted separately, and kitting is the handover point between them.
- Kitting control
- Kitting follows the issue document or placement table, issued material is restricted to its line, over-issue is warned, and surplus is split and returned.
- Line-side visibility
- Remaining material quantity and elapsed time at each slot appear on the station dashboard. Manage the line-side store and half-hour searches for material disappear.
Baichuan puts line-side residual quantity and elapsed time on the station dashboard.
17
How should barcode printers, scanners and PDAs be selected?
For printing, choose industrial printers with heat- and abrasion-resistant labels near reflow; for capture, fixed stations use scanners and mobile work uses PDAs with screens. Models, quantities and locations belong in the implementation plan.
- Printing
- Material labels near reflow must resist heat and abrasion, so choose an industrial printer with matching label stock. Printing software can be released to suppliers.
- Capture
- Fixed stations use fast, low-cost scanners; mobile scenarios need a PDA with a screen for prompts, error-proofing messages and light guidance.
- Implementation support
- Models, quantities and locations are listed in the implementation plan, with network drops and charging points planned ahead. Missing hardware is a common cause of budget overrun.
Baichuan lists hardware models, quantities and locations in the implementation plan.
18
How should the MES permission system be designed?
Preset role templates applied by position, BOM and cost data visible only to specific roles with export controlled separately, and complete login and operation logs.
- Role templates
- Common roles come as preset templates applied by position, which keeps administration cheap.
- Sensitive data isolation
- BOMs, process parameters and cost data are visible only to specific roles, with export permission controlled separately.
- Audit
- Login and operation logs are complete, and accounts can be disabled and reactivated online. Permissions in disarray are the source of leaks and unclear responsibility, so design them at the start.
Baichuan issues permissions by role template and controls export separately.
19
How should MES reports meet management needs?
Three layers: screens during a plant walk (station and consolidated dashboards), automated statistics and exports (daily production, quality and inventory reports), and scheduled plus exception-driven push.
- Dashboard layer
- SMT, test, assembly and packing station dashboards plus a consolidated view let management see the state during a walk-through.
- Report layer
- Daily production, quality and inventory reports are generated and exported automatically, removing manual table building.
- Push layer
- Exceptions escalate by level, shortages are pushed by email, and reports go out on schedule. Management attention is scarce, so reports must come to the reader. Baichuan's smart data push does exactly this.
20
During implementation, which data source is authoritative?
Run in parallel for one to two weeks and cut over only when discrepancies reach zero. Record the cutover point and the authoritative source in the implementation minutes and tell everyone.
- Parallel running
- The parallel period depends on data stability, commonly one to two weeks, with cutover only once the discrepancy rate meets the target.
- Attributing differences
- Each discrepancy is traced to a root cause (missed scan, wrong scan, process gap) and closed before moving on.
- Clear definition
- The cutover point and authoritative source go into the implementation minutes and are communicated to everyone. Ambiguity over data ownership causes disputes, so set the rule first.
Baichuan records the cutover point and authoritative source in the implementation minutes.
21
How are multiple suppliers for the same material managed?
Barcodes carry supplier, DC and date code, and loading records automatically retain the supplier dimension. Blocking can target a supplier plus date code precisely, and incoming plus process data combine into supplier evaluation.
- Lot binding
- Barcodes carry supplier, DC and date code, and loading records automatically retain the supplier dimension.
- Blocking dimensions
- Blocking supports supplier plus date code, so one supplier's problem lot is blocked without affecting others.
- Supplier analysis
- Incoming acceptance rate and process defect correlation are counted by supplier, giving supplier management a data basis. IQC data and process data are the two cornerstones of supplier evaluation.
Baichuan blocks precisely by supplier plus date code.
22
How is customer-specified material controlled?
Flag it in the BOM and route substitutions through approval; a non-specified part raises an alarm at loading. Approvals are recorded, and audits can be answered with evidence that specified material was used.
- BOM lock
- Specified material is flagged in the BOM, issuing can follow main and alternate rules, and a non-specified part raises an alarm at loading.
- Substitution control
- Substitution requests are approved and recorded (who approved, when, for which work orders), and loading releases only approved relationships.
- Evidence
- Showing that specified material really was used is answered with data during a customer audit. In disputes over specified material, MES records are the hardest evidence.
Baichuan flags specified material in the BOM and alarms on a non-specified part.
23
How is kitting checked automatically?
The work order BOM is compared against available stock to produce a shortage list, exportable and pushable to purchasing or the customer. Simulated locks keep kitted work orders first in line.
- Automatic comparison
- Work order BOM against available stock (including in-transit where needed) produces a shortage list that can be exported to purchasing or the customer.
- Simulated locking
- Work orders are sorted by due date or order quantity and locked in simulation, so locked material is not diverted and kitted orders keep priority.
- Shortage push
- Shortages are pushed to the relevant people by email. Finding a shortage before starting beats stopping the line to wait for material.
Baichuan's kitting check produces the shortage list and pushes it by email.
24
How are work order closure and over-issue handled?
Closure reconciles input, output, material used and surplus, with an exception review above a threshold. Over-issue generates a replenishment list from the work order and BOM, and surplus is scanned back to stock.
- Closure reconciliation
- Input, output, material used and surplus are summarised automatically, and discrepancies above the threshold are reviewed before closure.
- Over-issue control
- Replenishment requests are generated from the work order and BOM, approvals are recorded, and over-issue causes can be analysed.
- Surplus return
- Surplus at closure is scanned back to stock and a return document is generated, leaving no residual at the line. The last kilometre of the work order loop is surplus handling; clean it up and cost accounting becomes accurate.
Baichuan scans closure surplus back to stock and generates the return document automatically.
25
How does MES support delivery-date commitments (CTP)?
ERP calculates the promise, MES supplies the actuals (output rate by stage, work in progress, equipment state), and deviations feed back to correct the commitment.
- Data supply
- Output rate by stage, work-in-progress quantity and equipment state (inspection, maintenance, downtime) are queryable in real time.
- Bottleneck visibility
- Plan attainment, lost hours and open work order count appear on the consolidated dashboard, so the bottleneck operation is obvious.
- Coordination logic
- ERP calculates the promise, MES supplies actuals, and deviations feed back to correct it. Delivery accuracy depends on a closed data loop between planning and execution.
Baichuan supplies output rate by stage and work-in-progress as the actuals behind a commitment.
26
How are residual quantities on electronic reels managed?
Kitting prioritises residual reels through the lights, splitting prints two new codes linked to the original, and an empty-reel call light goes out only after the change is recorded.
- Residual-first
- Kitting prioritises residual reels through the lights (executed on a smart rack), avoiding opening a full reel while residuals accumulate.
- Split management
- Scan the original barcode and enter the split quantity; two new barcodes are printed and linked to the original, so traceability does not break.
- Empty-reel loop
- Scan an empty reel to call material, and the light goes out only after the new reel is recorded. Residual control is the touchstone of warehouse discipline.
Baichuan's kitting prioritises residual reels through the lights.
27
Who maintains the data in the system?
Master data is owned by engineering with changes recorded, transactional data is generated by scanning, and periodic audits of book-versus-physical and chain integrity are included in owner appraisals.
- Master data ownership
- BOM and material master changes go through the owning department (engineering) with the change recorded. Master data maintained by many hands always drifts.
- Transactional automation
- Station movement, material use and defect data are generated by scanning, minimising manual entry points.
- Management mechanism
- Periodic data audits (book-versus-physical, chain integrity) with data quality included in the owner's appraisal. Data is three parts technology and seven parts management.
Baichuan assigns master data ownership to engineering and records every change.
28
How are mixed lots in incoming material handled?
IQC checks barcode lots against the physical material and either rejects mixed lots or records a concession. Accepted mixed lots are split into separate lot codes, and the incidence is counted against the supplier.
- Gate on receipt
- IQC verifies barcode lot against the physical material, and mixed lots are rejected or put through a recorded concession process.
- Split and code
- Where material must be accepted, it is split into separate lot barcodes managed independently, with the split code linked to the original.
- Supplier pressure
- Mixed-lot occurrences enter incoming material statistics for the supplier, using data to force correction. Mixed lots not fixed in the plant get fixed in a customer complaint.
Baichuan's split barcodes link to the original reel, so mixed lots can be accounted separately.
29
A customer complains after shipment. How does MES help?
SN traceability pulls the history on the spot to identify the cause, forward tracing from the problem lot defines the shipped scope, and reason codes feed back into quality analysis so the countermeasure can be validated with later data.
- Fast diagnosis
- An SN traceability query pulls the full history, making clear whether it is a lot problem, a unit problem or a usage problem.
- Scoping the impact
- Forward tracing from the problem material lot defines the shipped scope, and the list of customers to notify is generated directly.
- Closed-loop improvement
- Complaint reason codes feed back into quality analysis and countermeasures are validated with subsequent data. Complaint handling moves from paying and moving on to closing the improvement loop, which is the long-term value of MES.
Baichuan's traceability scopes the shipped range forward from a problem lot.
30
We are considering MES. What is the first step?
Take stock of six things (lines, process stages, product types, customers and their barcode formats, existing systems, budget), rank pain points by frequency times loss, then visit a model factory and run a single-stage pilot.
- Self-assessment
- Line count, process stages, product types, main customers (and whether they use customer barcode formats), existing systems (ERP, spreadsheets) and budget range. Clarifying these six doubles the efficiency of the first conversation.
- Ranking pain points
- Rank by frequency times loss and solve the top three first. MES goes in module by module and stage by stage; no single patch cures everything.
- Verification actions
- Visit a model factory (Baichuan has six open by appointment) and run a single-stage pilot (from around CNY 100k, 4–8 weeks). Seeing a real system and running a pilot beats any selection report. Settle the solution before signing; pace matters less than direction.