FAQ and knowledge base

SMT error-proofing and material control

Feeder loading, solder paste, stencils, material racks

All questions 20 questions

01 How does SMT material loading error-proofing actually work?

A three-way check: slot number, material barcode and feeder number compared against each other, plus old-versus-new reel comparison at reload and a full-slot check at changeover. Any mismatch is intercepted at the configured level.

Three-way check
Slot number, material barcode and feeder number are cross-checked. When an operator reloads material, the outgoing and incoming reels are compared as well; at changeover every slot is verified.
Escalating interception
Level one prompts and locks the PDA; level two adds an audible and visual alarm on the monitoring PC; level three adds a line-stop controller that interlocks the mounter. Release is automatic once resolved, and the level is chosen by product value.
Audit trail
Loading records are generated automatically: who loaded what, when, and which reel. That is also the data source for reel-level traceability.

Baichuan makes the three-way check a mandatory step in the loading scan; loading cannot be confirmed without it.

02 What do the three levels of material error-proofing mean?

Level one prompts and locks the PDA, level two adds an audible and visual alarm on the monitoring PC, level three adds a line-stop controller that interlocks the mounter. Release is automatic after handling. Choose the level by product value; there is no need to install all three at once.

Level one: PDA lock
A mismatched scan prompts and locks the PDA, so the operator cannot continue loading. This contains wrong material first, and is where plants with limited budget start.
Level two: with audible and visual alarm
On multi-line floors, a line-linked alarm tells the team leader immediately. Suited to shops that need on-the-spot coordination.
Level three: with line-stop control
A wrong reel forces the mounter cycle to stop and releases automatically once handled. Used on high-value products and lines with zero tolerance for wrong material. Baichuan offers the three levels as steps that can be configured per line.

03 Why does wrong material keep getting through?

Three root causes: spot checks across dozens of slots always miss some, alternate-part relationships are passed on verbally, and at changeover the placement table and reels are most easily confused.

People cannot watch everything
A line has dozens of slots and mixed models run through them. With IPQC spot checks and operator self-checks, missed checks are inherent.
Alternate parts are unclear
The BOM defines alternates but the relationship is passed on verbally, so loading an unapproved alternate goes unnoticed. Once the main-versus-alternate relationship is explicit in the system, comparison recognises it automatically.
Changeovers
The riskiest moment: placement table, reels and feeders all change at once. Generating the placement table and kitting list before the changeover and scanning slot by slot during loading closes the gap.

Baichuan links feeder placement table, kitting list and loading scans into one chain, verified slot by slot at changeover.

04 What is the difference between PDA error-proofing and line-stop control?

PDA error-proofing locks the terminal so material cannot be loaded; line-stop control interlocks the mounter so it cannot run. Use the former for trials and low-value products, and level three for high-value mass production.

PDA error-proofing
A mismatched scan alarms and locks the terminal, so the operator cannot confirm loading. Suits most scenarios at low cost.
Line-stop control
A line-stop controller interlocks the mounter, so a wrong reel means the machine does not run. It removes the temptation to keep producing after an alarm.
How to choose
Trials and low-value products use the PDA level; mass production, high-value products and strict customer audits use level three. The point is to stop wrong material before placement; finding someone to blame afterwards is not error-proofing.

Baichuan's three-level interception is configured as steps per line, without installing all levels at once.

05 How is wrong material prevented during changeover?

Before the changeover, compare the feeder placement table against the BOM. During it, scan each reel barcode by slot and verify the feeder number. The line starts only when every slot matches.

Before the changeover
The placement table is compared with the BOM first, so slot-count mismatches and part descriptions that do not match part numbers surface before the error reaches the line.
Changeover verification
PDA scans each reel barcode by slot and verifies the feeder number against the placement table. The line starts only when all slots match; a missed check raises an alarm.
The efficiency worry
Does error-proofing slow changeovers down? No: scanning replaces manual reel-by-reel checking and the records are archived automatically. Most plants change over faster because nobody stops to find someone to confirm.

Baichuan performs changeover verification by scanning and archives the verification automatically.

06 What if the feeder placement table does not match the BOM?

Engineering issues the placement table and PMC maintains the BOM; the system runs a comparison and sends a discrepancy list back to the owners. After an engineering change both sides are updated and the old revision locked.

Who reconciles
Engineering or process issues the feeder placement table, PMC maintains the BOM, and the system compares the two and returns a discrepancy list to the responsible owners.
What the system does
Automatic matching between material master and BOM, detection of slot-count and part-description mismatches. This comparison is standard in an MES engineering module; do not filter spreadsheets by hand.
Keeping revisions in step
After an engineering change (ECN) the placement table and BOM are updated together and the old revision locked, otherwise a reconciled account drifts apart again.

Baichuan's engineering module includes placement-table versus BOM comparison and sends the discrepancy list straight to the owners.

07 How are alternate parts managed in MES?

Attach several part numbers to one slot, flag the main part as 1 and alternates as 0, and record the relationship in the BOM. At loading, the system decides whether a scanned reel is an approved alternate or the wrong material.

Data structure
Several part numbers under one slot, main part flagged 1 and alternates 0, with the relationship written into the BOM instead of announced by email.
Shop-floor checking
At loading the system recognises whether a reel is an approved alternate or wrong material, so operators do not have to memorise alternate relationships.
Traceability
Actual alternate usage is stored, so when a customer asks which supplier's part went into this slot the answer is accurate, avoiding the traceability gap left by verbal substitution.

Baichuan writes main and alternate flags into the BOM and lets the system decide at loading.

08 How are reel barcodes printed and what should the rules be?

The barcode carries supplier, date code, DC, quantity, customer, specification and material ID. Print in-house or release the printing software to suppliers; customer barcodes with fixed rules can be parsed directly.

What the barcode contains
Supplier, date code, DC, quantity, customer, specification and material ID. These fields are what allow reverse lookup by DC and lot during traceability.
Who prints it
In-house or by the supplier: the printing software can be released to suppliers so material arrives already coded. Customer barcodes with fixed rules (phone brand and ODM formats) can be parsed and used directly without reprinting.
Splitting a reel
Scan the original barcode, enter the quantity, and the system prints two new RID barcodes linked to the original reel, so residual quantities stay straight.

Baichuan can release its barcode printing software to suppliers so incoming material arrives already coded.

09 Can supplier barcodes be used as they are?

If the barcode follows fixed rules and is unique per package, it can be parsed directly, saving a labelling step. Loose or uncoded material is closed the same way by printing MES barcodes on the smallest package.

When parsing works
The customer or supplier barcode follows fixed rules and is unique. Once the parsing rule is set up in MES, scanning identifies the material; most electronic material from phone brand and ODM customers falls into this group.
Incoming verification
The MES barcode is compared with the manufacturer barcode to catch mislabelled material, checked conveniently during IQC.
When there are no rules
For loose or uncoded incoming material, print an MES barcode on the smallest package and attach it to the reel or bag; the process closes the same way.

Baichuan's barcode parsing binds customer-format codes directly, without reprinting.

10 What loading records are kept, and are they traceable?

Slot, material barcode, feeder number, operator, timestamp and the old-versus-new reel comparison are recorded. Material can be queried by SN in one direction and flow queried by reel in the other.

What is recorded
Slot, material barcode, feeder number, operator, timestamp and the old-versus-new reel comparison, plus the full-slot verification record at changeover.
Two-way queries
Forward: material used for a PCB or SN. Reverse: where a reel went. Auditors can ask from either direction and get an answer.
Reel-level precision
One reel feeds many boards and one board uses many reels. Reel level is inferred by matching each reel's loading timestamp against the PCB station time window. Baichuan does this matching, so traceability lands on the reel rather than the batch.

11 How are feeders managed?

Barcode registration, maintenance plans, repair records and scrapping all leave a history. Overdue maintenance raises an alarm, and loading verifies feeder against slot and material as a three-part check.

Lifecycle
Feeder barcode creation, registration, maintenance plan, repair record and scrapping, with a full history.
Maintenance monitoring
Each feeder's maintenance execution is monitored by the system, with alarms for missed maintenance rather than relying on memory.
Linked to error-proofing
Loading verifies slot, material and feeder together, so a feeder mounted in the wrong slot is also caught.

Baichuan manages feeders as equipment and accessories, with maintenance records and loading checks on the same chain.

12 What steps does solder paste management involve?

Seven steps: storage, warm-up, stirring, opening, issuing, replenishing and residual handling, each with a scan and timestamp. If paste has not warmed up or has timed out, the system blocks issue outright.

Barcodes throughout
Each jar gets a barcode (supplier, date code, DC, specification, part number, quantity), and FIFO is managed by label.
Key controls
Warm-up time is configurable, and issue is blocked before it is met. The next jar cannot be opened before the previous one is finished. Replenishment is recorded per addition, and wrong model, over-warm paste and expired open jars are all intercepted.
Reporting
Storage, warm-up, issue and replenishment reports are all available and stock is real time, so the paste room no longer runs on whiteboards and sticky notes.

Baichuan's paste module assigns a code per jar so warm-up, opening and issuing cannot skip a step.

13 How is solder paste warm-up time controlled?

Scanning the paste barcode at issue starts the clock. Warm-up duration is set by plant rule or supplier instruction, and issue is blocked until it is met, with a full audit trail.

Timing rule
Scanning at issue starts the warm-up record, and the required duration is configurable per plant rule or supplier datasheet.
Interception logic
If paste has not warmed up or the time is short, the system blocks issue. Issue can be tied to a specific model to prevent wrong allocation.
Traceability
Which jar, how long it warmed, and which work order it served are all recorded, so a quality investigation can trace the paste step.

Baichuan allows warm-up duration to be set by plant rule, and blocks issue until it is met.

14 How are stencils managed, and how is usage counted?

A barcode ledger plus tension records; scanning at line setup intercepts wrong model, usage over limit and missing cleaning. Usage accumulates automatically and the stencil is forced offline at the limit.

Basic ledger
Stencil barcode, tension test value (manual entry or integrated with a tension tester), storage location, issue and stock movement.
Checks at line setup
Scanning the stencil barcode intercepts three conditions: wrong model, usage over the configured limit, and cleaning not performed. Starting a line without scanning a stencil also raises a reminder.
Life management
Usage accumulates automatically and the stencil is forced offline for scrapping at the limit. Cleaning and quality confirmation records follow the barcode, which makes audits straightforward.

Baichuan's stencil module integrates with tension testing and forces a stencil offline when usage reaches the limit.

15 How are stencil cleaning records kept from being missed?

Aperture inspection, tension test, storage, issue, line setup, line removal, cleaning and cleaning completion each leave a scan record, with automatic alarms instead of supervisor patrols.

Closed loop
Aperture inspection, tension test, storage, issue, line setup, line removal, cleaning and cleaning completion: every step leaves a scan record.
Alarm rules
Starting a line without a stencil scan, an uncleaned stencil and usage over the limit raise automatic alarms, without relying on supervisor patrols.
Record queries
Stencil lists, cleaning records and usage counts export at any time, ready to hand over during a customer audit.

Baichuan keeps stencil cleaning records on the barcode and exports them directly for audits.

16 How are moisture-sensitive devices (MSD) managed?

Build a moisture-level library by part number, scan the MSD label to record opening time and alarm on expiry. Scan on completion or reseal, and after baking reseal and reprint the label.

Definition
Moisture sensitivity level is defined per part number and kept in a library that can be bulk imported.
Opening control
Scanning the MSD label records the opening time, and an alarm is raised if the floor life is exceeded in use. Scanning on completion records the end; unused material is scanned as resealed.
Baking and reset
Expired material is baked, resealed and given a new MSD label, with baking time also controlled. Opening, resealing and expiry warnings are all queryable.

Baichuan's MSD control covers opening, resealing, expiry warnings and baking resets.

17 How is material expiry warned about?

Stock age beyond the limit is warned to warehouse and planning first, then intercepted at issue. Near-expiry material is highlighted for priority use, and slow-moving reels get periodic reminders.

Expired
Material whose stock age exceeds the configured limit is warned to warehouse and planning, and blocked at issue.
Near expiry
Material approaching expiry is highlighted early and scheduled for priority use, following the first-in-first-out and residual-first principle.
Slow moving
Reels with no movement over a long period get a reminder. With smart racks, expired reels are warned automatically and the pick-to-light guidance makes using the older reel the practical default.

Baichuan connects expiry warnings with smart rack lights, so old material is actually used first.

18 What is a smart material rack and how is it used?

A pick-to-light rack: upload a kitting list and the matching locations light up; an unauthorised pick shows a red alarm and locks the slot, and FIFO with residual-first is enforced by the lights.

Light-guided location
After a kitting list is uploaded, the corresponding locations light up, so even new staff find the right part first time and kitting gets noticeably faster.
Error-proofing
An unauthorised pick shows a red light and an audible alarm, preventing wrong picks and loss. Top-side and bottom-side material is stored separately and lit per work order.
Data linkage
The rack and MES share one data set, so loading, unloading and kitting are recorded automatically and changing racks does not affect the system. Baichuan's smart racks ship fully assembled, run on power-up, and come in three models for different warehouse and line layouts.

19 How does empty-reel material calling work?

Scanning the empty reel barcode triggers it (the system first checks the reel has a loading record), the rack location lights up and the PDA shows the position; after scanning the new reel the light goes out and the change is recorded.

Trigger
The operator scans the empty reel barcode, and the system verifies the reel actually has a loading record to prevent false calls.
Guidance
The corresponding rack location lights up and the PDA shows where the material is, so it is found quickly and picked correctly.
Closing the loop
Scan the new reel, the PDA confirms the material is correct, the location light goes out automatically and the change record is created.

Baichuan's empty-reel call verifies the loading record first, avoiding false calls.

20 What makes an electronic material rack better than ordinary shelving?

Three differences: light guidance cuts search time, FIFO and residual-first are executed by the system, and expired reels are warned automatically. A new rack ships assembled and runs on power-up.

Efficiency
After importing a kitting list the system guides picking, cutting search time, and several kits can be prepared at once.
Accuracy
FIFO and residual-first are executed through the lights rather than remembered by the storekeeper, and expired reels are warned early.
Investment
New racks ship assembled and run on power-up; retrofit options cost less and can hold non-SMT material. Stock data is real time and reports are generated automatically.

Baichuan's smart racks ship assembled, run on power-up, and come in three models.

Next

Send us your line's problems

Describe your line's current state and the step that most needs fixing; we'll send a solution outline per process stage within 2 business days.

Address
Building 8, Room 303, Yilisheng Industrial Park, 602 Fengtang Avenue, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen

Shenzhen Baichuan Zhike Technology Co., Ltd. · Since 2015 , serving electronics manufacturers across handsets, tablets, automotive electronics, FPC, WiFi modules, energy storage and more.

Used for this conversation only; never shared externally. By submitting you agree to be contacted about this request.

Questions?